# New Session

***Copyright © Quectel Wireless Solutions Co., Ltd. 2026. All rights reserved.***

---

This chapter mainly introduces the QPiTerminal tool for creating multiple session functions.

## SSH

**'New Session-->SSH'** Open SSH connection interface

```{image} images/image_N0CobSDkwoxGxex2kaIcpFbTnRc.webp
:width: 546px
:height: 353px
:align: center
```

Fill in the server information and click connect to create a new SSH terminal page. The connection record will be saved on the left side and can be opened again by double clicking.

```{image} images/image_YfmRbeRscoMNHzxHZQvcKZmAnid.webp
:width: 1920px
:height: 1032px
:align: center
```

There are two buttons in the upper right corner of the SSH terminal page, **SFTP** and **Status**, which can respectively open the SFTP file transfer and status panel on the current page.

```{image} images/image_NDoFbYq0nocSewxcSTXcceXAnEf.webp
:width: 1920px
:height: 1032px
:align: center
```

## SFTP

**'New Session-->SFTP'** Open SFTP connection interface

```{image} images/image_PNqSbaj5VoXuwtxvSLQcrom9nnd.webp
:width: 546px
:height: 353px
:align: center
```

Fill in the server information and click connect to create a new SFTP page. The connection record will be saved on the left side and can be opened again by double clicking.

```{image} images/image_JM6DbAak6o9w6BxP8IjcvyHMnUe.webp
:width: 1920px
:height: 1032px
:align: center
```

## Serial

**'New Session-->Serial'** Open the Serial Connection interface

```{image} images/image_ChCXbr6XgoVxicxtdm0cVGjbnUc.webp
:width: 466px
:height: 253px
:align: center
```

Select the correct serial port, click Connect to create a new Serial page, and the connection record will be saved on the left side, which can be opened again by double clicking.

```{image} images/image_PEktb7WARo021txGB86cXTDAn1f.webp
:width: 1920px
:height: 1032px
:align: center
```

## Local

**'New Session-->Local'** Open the Local Connection interface

```{image} images/image_Fv5ybWJywoaEGlxNzbAcn2r8ndh.webp
:width: 486px
:height: 253px
:align: center
```

At present, only PowerShell is supported. Clicking on the connection will create a new PowerShell terminal page, and the connection record will be kept on the left side, which can be opened again by double clicking.

```{image} images/image_PwC9bpnnSoYkm5x5pq2cB9ZAnHe.webp
:width: 1920px
:height: 1032px
:align: center
```

## ADB

**'New Session-->ADB'** Open ADB interface

```{image} images/image_Whydbt3w8oZ20uxmIGpcD3fRnVd.webp
:width: 1920px
:height: 1032px
:align: center
```